Tile Types Results

Ceramic Tile for the Toilet/Bathroom Wall

Are Ceramic Tile for the Toilet/Bathroom Wall a good option?

Ceramic tiles are popular as toilet wall tiles as they are non-porous, scratch-resistant, and long-lasting.

Is Oriented Strand Board (OSB) a good substrate for Ceramic Tile on the Toilet/Bathroom Wall?

Oriented Strand Board (OSB) is unsuitable as a ceramic tiles substrate due to its tendency to expand and contract. If bonding ceramic tiles to an OSB wall is necessary, a membrane must be used on the OSB before the ceramic tiles are installed. It is important to note that the OSB may not have a long lifespan in this scenario.

Ceramic Tile Characteristics

• Ceramic Tile ease of installation: Ceramic tile installation can range from moderate to difficult, depending on the surface being tiled and the installer's skill level. On a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult, ceramic tile installation can be around a 6 or 7.
  
• Ceramic Tile weight: Ceramic tiles typically weigh 5-10 on a scale of 10, with 10 being the heaviest. They are considered to be lightweight building materials.
  
• Ceramic Tile thickness: Ceramic tiles typically range in thickness from about 1/4 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods.
  
• Ceramic Tile Slip resistance: Ceramic tiles can have varying levels of slip resistance, depending on their type and surface finish. On a scale of 1 to 10, with 10 being the most slip-resistant, many ceramic tiles would fall from 5 to 8.
  
• Ceramic Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate ceramic tiles as having a resistance to scratches of around 8 or 9. However, it is important to note that this can vary depending on the ceramic tile's specific brand, type, and quality. Proper cleaning and maintenance methods can also affect the resistance to scratches.
  
• Ceramic Tile Indoor to Outdoor: Ceramic tiles can be used for both indoor and outdoor areas. However, it is important to ensure that the tiles are rated for outdoor use, as they will be exposed to the elements. Outdoor ceramic tiles typically have a higher level of slip resistance and are more durable than indoor tiles. Additionally, using a sealant on the tiles is a good idea to protect them from moisture and stains.
  
• Ceramic Tile Cost: In general, ceramic tiles can range from relatively inexpensive to moderately priced. Some basic ceramic tiles can cost as little as $0.50 per square foot, while more high-end or designer tiles can cost $10 or more per square foot.
  

Ceramic Tile: Natural looking

Ceramic tiles can have a natural-looking top layer and are often designed to mimic the look of natural stone, such as marble, granite, and limestone, as well as other materials like wood, metal, and concrete.

Ceramic Tile: Mosaic

Ceramic tile can have a mosaic appearance. Mosaic tile is a type of tile composed of small pieces of ceramic, glass, or other materials arranged in a pattern to form a decorative design. Ceramic tile can be cut into small pieces and utilized in a mosaic pattern to create a unique and decorative look for surfaces such as floors, walls, and backsplashes.

Porcelain Tile for the Toilet/Bathroom Wall

Are Porcelain Tile for the Toilet/Bathroom Wall a good option?

Porcelain is a suitable option for use on toilet walls, as it is sturdy, waterproof, and easy to clean, making it an ideal choice for sanitary purposes.

Is Oriented Strand Board (OSB) a good substrate for Porcelain Tile on the Toilet/Bathroom Wall?

Porcelain tiles cannot be installed directly on the Oriented Strand Board (OSB). Like particle boards, OSB is not a recommended substrate for direct bonding with porcelain tiles

Porcelain Tile Characteristics

• Porcelain Tile ease of installation: Porcelain tile installation can range from moderate to difficult, depending on the surface being tiled and the installer's skill level. On a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult, porcelain tile installation can be around 6 or 7. Porcelain tiles are harder and denser than ceramic tiles, making cutting and shaping them more challenging. However, they are also less porous and more durable, making them popular in high-traffic areas. Before attempting to install porcelain tiles, knowing about tile installation and the proper tools is important.
  
• Porcelain Tile weight: Porcelain tiles typically weigh 8-10 on a scale of 10, with 10 being the heaviest. They are considered to be a relatively heavy building material compared to ceramic tiles.
  
• Porcelain Tile thickness: Porcelain tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods.
  
• Porcelain Tile Slip resistance: Porcelain tiles have a high resistance to slipping and are rated at an 8 or higher on a scale of 10. However, a tile's slip resistance can also depend on its surface finish, glaze, and installation method. A tile with a textured surface or a matte finish usually has a higher slip resistance than a glossy tile.
  
• Porcelain Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate porcelain tiles as having a resistance to scratches of around 9 or 10. However, it is important to note that this can vary depending on the specific brand, type, and quality of the porcelain tile
  
• Porcelain Tile Indoor to Outdoor: Porcelain tiles can be utilized for indoor and outdoor areas, as they are less porous and thus less prone to staining and moisture absorption. Additionally, porcelain tiles are frost-resistant and can be used in exterior applications in cold climates. However, ensuring that the porcelain tiles you select are rated for outdoor use is crucial, as some may not be suitable for exposure to the elements.
  
• Porcelain Tile Cost: Porcelain tiles come in a variety of sizes, including standard sizes such as 4x4 inches, 6x6 inches, 8x8 inches, and 12x12 inches; larger sizes such as 16x16 inches, 18x18 inches, 24x24 inches, and even 36x36 inches; and small mosaic sizes like 2x2 inches, 1x2 inches, and 1x1 inches. Some porcelain tiles come in a wood plank shape, like 6x36 inches, 7x48 inches, and 8x48 inches. The size of the porcelain tile will depend on the application and design of the area where they will be installed, similar to ceramic tile.
  

Porcelain Tile: Natural looking

Porcelain tiles can indeed have a natural-looking top layer. They are made from denser and more durable ceramic clay and fired at higher temperatures than other ceramic tiles.

Porcelain Tile: Mosaic

Porcelain tiles can have a mosaic appearance. Porcelain mosaic tiles are usually composed of small pieces of porcelain arranged in a pattern to create a mosaic effect. These tiles can be utilized for various applications, including as a backsplash, on floors, and in showers.

Glass Mosaic Tile for the Toilet/Bathroom Wall

Are Glass Mosaic Tile for the Toilet/Bathroom Wall a good option?

Ceramic tile is suitable for bathroom and toilet walls because it is durable, washable, and stain-resistant.

Is Oriented Strand Board (OSB) a good substrate for Glass Mosaic Tile on the Toilet/Bathroom Wall?

Oriented Strand Board (OSB) is a dimensionally unstable substrate, making it an unsuitable choice for direct bonding with glass tiles.

Glass Mosaic Tile Characteristics

• Glass Mosaic Tile ease of installation: Installing glass mosaic tile can vary in difficulty depending on the specific project and the installer's experience. On a scale of 1 to 10, with 1 being the easiest and 10 being the most difficult, installing glass mosaic tile generally falls around a 5 or 6. It requires some skill and attention to detail, but a DIYer can do it successfully with proper planning and the right tools.
  
• Glass Mosaic Tile weight: Glass mosaic tiles are generally considered to be a very lightweight building material, typically weighing between 2-5 on a scale of 10, with 10 being the heaviest.
  
• Glass Mosaic Tile thickness: Glass mosaic tiles typically range in thickness from about 3/16 inch to 1/4 inch. Their thickness is usually consistent and uniform as they are made by cutting and shaping individual pieces of glass.
  
• Glass Mosaic Tile Slip resistance: Glass mosaic tiles generally have a lower resistance to slipping than porcelain tiles. They are usually rated at a 5 or lower on a scale of 10. This is due to their smooth and glossy surface, making them slippery when wet. Using them in dry, low-traffic areas such as walls or backsplashes is highly recommended.
  
• Glass Mosaic Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate glass mosaic tiles as having a resistance to scratches of around 6 or 7.
  
• Glass Mosaic Tile Indoor to Outdoor: Glass mosaic tiles can be utilized for indoor and outdoor areas, but it is crucial to ensure they are rated for outdoor use, as they will be exposed to the elements. Outdoor glass mosaic tiles typically have a higher slip resistance and greater durability than indoor tiles. Furthermore, using a sealant on the tiles is a good idea to protect them from moisture and stains.
  
• Glass Mosaic Tile Cost: Glass mosaic tiles can be more costly than ceramic or porcelain tiles. Some basic glass mosaic tiles can be found for as little as $15 per square foot, while more high-end or designer tiles can cost $30 or more per square foot. On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, I would rate glass mosaic tiles around 8-9.
  

Glass Mosaic Tile: Natural looking

Glass mosaic tiles usually don't have a natural-looking top layer since they are made of small pieces of glass cut into shapes and arranged in a pattern to create a decorative surface.

Glass Mosaic Tile: Mosaic

Glass mosaic tile can indeed have a mosaic appearance. Glass mosaic tiles are composed of small pieces of glass arranged in a pattern to create a mosaic effect.

Cement Tile for the Toilet/Bathroom Wall

Are Cement Tile for the Toilet/Bathroom Wall a good option?

Cement tiles are not the best option for bathroom or toilet walls. Cement tile is cured at room temperature, not fired, and the colored layer on top, usually about an eighth inch thick, is porous. Once stained, it is difficult to clean.

Is Oriented Strand Board (OSB) a good substrate for Cement Tile on the Toilet/Bathroom Wall?

Cement tiles absorb moisture when exposed to them, which can affect bonding with the Oriented Strand Board (OSB).

Cement Tile Characteristics

• Cement Tile ease of installation: On a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say installing cement tile generally falls around a 6 or 7. Cement tiles are thicker and harder to cut, and grout lines are usually narrower.
  
• Cement Tile weight: Cement tiles typically weigh 8-10 on a scale of 10, with 10 being the heaviest. They are generally considered very heavy building materials because of the use of cement as a main ingredient in their manufacturing process.
  
• Cement Tile thickness: Cement or encaustic tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods. The thickness may vary depending on the manufacturer and the type of tile, but they are usually consistent and uniform.
  
• Cement Tile Slip resistance: Cement tiles can have varying levels of slip resistance, depending on their surface finish and pattern. A smooth, glossy surface finish on a cement tile will have a lower slip resistance rating, around a level of 5 or lower, on a scale of 10. However, a textured or matte finish on a cement tile can increase its slip resistance, potentially rating as high as 6 or 7
  
• Cement Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate cement tiles as having a resistance to scratches of around 7 or 8. It is important to note that proper sealing and periodic maintenance can help protect cement tiles from scratches and stains.
  
• Cement Tile Indoor to Outdoor: Cement tiles are appropriate for both indoor and outdoor areas. Made of cement, pigment, and sand, they possess durability and resistance to wear and tear. Cement tiles are well-suited for outdoor use as they can handle extreme temperature changes, sun exposure, and moisture. Nevertheless, it is important to remember that cement tiles are not as slip-resistant as other tile types and may not be appropriate for areas that often get wet.
  
• Cement Tile Cost: Cement tiles are typically more expensive than ceramic or porcelain tiles and can be comparable in price to glass mosaic tiles. Some basic cement tiles can be found for as little as $5 per square foot, while more high-end or designer tiles can cost $20 or more per square foot. On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, I would rate cement tiles around 7-8.
  

Cement Tile: Natural looking

Cement tiles can have a natural-looking top layer, depending on the design and finish. Cement tiles, or encaustic tiles, are made by pouring a mixture of cement, pigments, and sand into a mold and then pressing and curing the tile.

Cement Tile: Mosaic

Cement tile can have a mosaic appearance. Cement tiles, also called encaustic tiles, are typically produced by molding a mixture of cement, pigments, and water into molds. These molds often feature a mosaic pattern, so they will have a mosaic appearance when the tile is pressed and set.

Marble Tile for the Toilet/Bathroom Wall

Are Marble Tile for the Toilet/Bathroom Wall a good option?

Marble tiles are suitable for bathroom and toilet walls. But I recommend using unsanded grout during installation, which requires keeping the space between tiles small (less than 1/8 inch).

Is Oriented Strand Board (OSB) a good substrate for Marble Tile on the Toilet/Bathroom Wall?

Oriented Strand Board (OSB) is not a suitable substrate for marble tile installation, but it can be used if appropriate precautions are taken. The main issue with OSB is that it is not waterproof and can expand when exposed to moisture, causing the surface to become uneven.

Marble Tile Characteristics

• Marble Tile ease of installation: On a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say that installing marble tile generally falls around a 7 or 8. Marble is a natural stone; thus, it is more delicate and prone to chipping or cracking during installation. It also requires more skill, attention to detail, and specialized tools and techniques compared to traditional ceramic tile.
  
• Marble Tile weight: Marble tiles typically weigh 9-10 on a scale of 10, with 10 being the heaviest. They are generally considered a relatively heavy building material because of the nature of the marble stone, which is denser than other materials like ceramic or glass.
  
• Marble Tile thickness: Marble tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods.
  
• Marble Tile Slip resistance: Marble tiles can have varying levels of slip resistance, depending on their surface finish and pattern. A polished finish on a marble tile will have a lower slip resistance rating, around a level of 5 or lower, on a scale of 10. A honed or matte finish on a marble tile will increase its slip resistance, potentially rating as high as 6 or 7.
  
• Marble Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate marble tiles as having a resistance to scratches of around 4 or 5. It is important to note that this can vary depending on the specific type of marble and its quality. Proper cleaning and maintenance methods, such as regular sealing, can also affect scratching resistance. Additionally, it is important to be mindful of acidic substances, such as citrus juices, vinegar, or wine, which can etch and damage the surface of the marble.
  
• Marble Tile Indoor to Outdoor: Marble tiles can be used for indoor to outdoor applications, but it is crucial to contemplate the durability and maintenance of the marble in an outdoor setting. Marble is a porous stone that is vulnerable to staining and etching from acidic substances such as rainwater and fertilizer. Utilizing marble tiles outdoors should be sealed regularly to safeguard them from the elements.
  
• Marble Tile Cost: Marble tiles are generally more expensive than ceramic, porcelain, cement, or glass mosaic tiles. Some basic marble tiles can cost as little as $10 per square foot, while more high-end or designer tiles can cost $50 or more per square foot. On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, I would rate marble tiles around 8-10.
  

Marble Tile: Natural looking

Marble tiles typically feature a natural-looking top layer since they are made from natural marble stone.

Marble Tile: Mosaic

Marble tile can have a mosaic appearance. This can be accomplished by cutting the marble tile into small pieces, referred to as tesserae, and arranging them in a mosaic pattern. These tesserae are then cemented to a backing surface to create a mosaic.

Granite Tile for the Toilet/Bathroom Wall

Are Granite Tile for the Toilet/Bathroom Wall a good option?

Ivory granite wall cladding is a perfect option for bathroom walls. It not only looks great but also protects the space from bacteria growth.

Is Oriented Strand Board (OSB) a good substrate for Granite Tile on the Toilet/Bathroom Wall?

Oriented Strand Board (OSB) should not be tiled on directly with granite tiles due to the effects of moisture. When a suitable primer is applied to the OSB wall to protect it from moisture and even the surface, granite tiles can use a high-quality, flexible adhesive to protect against deformation.

Granite Tile Characteristics

• Granite Tile ease of installation: Installing granite tile typically falls between an 8 and 9 on a difficulty scale of 1 to 10, with 1 being the easiest and 10 being the most difficult. Granite is a natural stone that is harder and more durable than marble or limestone, but it can be heavy and difficult to handle and requires specialized cutting tools.
  
• Granite Tile weight: Granite tiles typically weigh 9 to 10 on a scale of 10, with 10 being the heaviest. They are considered to be a very heavy building materials due to the density of the granite stone. This high density provides resistance to scratches, stains, and heat, making it suitable for high-traffic areas, kitchens, and bathrooms.
  
• Granite Tile thickness: Granite tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in a variety of thicknesses to accommodate different applications and installation methods. As a natural stone product, the thickness of the tiles may vary depending on the piece of granite being cut.
  
• Granite Tile Slip resistance: It is also important to note that the slip resistance of a granite tile will depend on the type of surface it is installed on, whether it is wet or dry, and the amount of foot traffic it will receive. A polished finish on a granite tile will have a lower slip resistance rating, around a level of 5 or lower, on a scale of 10. A honed or matte finish on a granite tile will increase its slip resistance, potentially rating as high as 6 or 7.
  
• Granite Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate granite tiles as having a resistance to scratches of around 7 or 8. It is important to note that many granite tiles are sealed at the factory, but it is still recommended to reseal them to maintain protection periodically.
  
• Granite Tile Indoor to Outdoor: Granite tiles can be utilized for indoor to outdoor applications, as granite is a sturdy and hard stone that can handle the elements well. It is also resistant to scratches, chips, and stains. However, it is crucial to remember that granite can become slippery when wet, so it may not be optimal for outdoor areas that frequently experience water or snow. Furthermore, granite should be sealed regularly to protect it from staining and discoloration.
  
• Granite Tile Cost: Generally, granite is considered a high-end material and can be more costly than other types of tile. However, the price can vary greatly depending on the specific product and location.
  

Granite Tile: Natural looking

Granite tiles generally have a natural-looking top layer made from natural granite stone.

Granite Tile: Mosaic

Granite tile can have a mosaic appearance. Like marble tiles, granite tiles can be cut into small pieces called tesserae and arranged in a mosaic pattern to create a decorative image or design. These tesserae can then be cemented to a backing surface to form a granite mosaic.

Limestone Tile for the Toilet/Bathroom Wall

Are Limestone Tile for the Toilet/Bathroom Wall a good option?

Limestone tile is a stylish option for toilet and bathroom walls, but it must be properly sealed.

Is Oriented Strand Board (OSB) a good substrate for Limestone Tile on the Toilet/Bathroom Wall?

Limestone cannot be laid on the Oriented Strand Board (OSB). OSB is a wood-based panel that expands and contracts with changes in moisture content, making it an unacceptable substrate for direct bonding with natural stone tiles and cement mortars.

Limestone Tile Characteristics

• Limestone Tile ease of installation: On a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say that installing limestone tile generally falls around 7 or 8. Limestone, a natural stone, is similar to marble in terms of its fragility and is prone to chipping or cracking during installation.
  
• Limestone Tile weight: Limestone tiles typically weigh 7 to 8 on a scale of 10, with 10 being the heaviest. They are considered a relatively heavy building material due to the nature of limestone stone, which is denser than other materials like ceramic or glass but not as heavy as granite or marble.
  
• Limestone Tile thickness: Limestone tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods. Limestone tiles tend to be thinner than other natural stone tiles, such as granite or marble.
  
• Limestone Tile Slip resistance: I would rate the slip resistance of limestone tiles as 6 to 7 on a scale of 10, as limestone tiles can be slippery when wet. The slip resistance of limestone tiles can also depend on the tile's finish. For example, honed or brushed tiles are generally less slippery than polished tiles.
  
• Limestone Tile Scratch resistance: On a scale of 1 to 10, with 1 being low resistance and 10 being high resistance, I would rate limestone tiles as having a resistance to scratches of around 4 or 5. However, it is important to note that this can vary depending on the specific type of limestone and its quality. Regular sealing and proper cleaning and maintenance methods can also affect scratching resistance.
  
• Limestone Tile Indoor to Outdoor: Limestone may not be the most suitable option for outdoor applications as it necessitates regular maintenance and protection from elements such as rainwater and fertilizer. It is more appropriate for indoor or covered outdoor areas with less foot traffic.
  
• Limestone Tile Cost: On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, limestone tiles would likely fall between 5 to 7. Limestone is generally considered a more affordable alternative to marble or granite, and its prices are lower than those two but more expensive than ceramic or porcelain tiles. The price will depend on the specific product and location.
  

Limestone Tile: Natural looking

Limestone tiles can have a natural-looking top layer, as they are often cut from natural limestone rock.

Limestone Tile: Mosaic

Limestone tile can have a mosaic appearance. Like marble and granite tiles, limestone can be cut into small pieces and arranged in a mosaic pattern to create a decorative image or design.

Travertine Tile for the Toilet/Bathroom Wall

Are Travertine Tile for the Toilet/Bathroom Wall a good option?

Travertine tile can be used on bathroom walls thanks to its superb durability and slip-resistant characteristics. However, because of its porous nature, it must be sealed to protect its natural beauty and ensure it doesn't absorb liquids.

Is Oriented Strand Board (OSB) a good substrate for Travertine Tile on the Toilet/Bathroom Wall?

Travertine tiles should not be installed on an Oriented Strand Board (OSB) due to their porous surface with holes and pits. These holes allow moisture to penetrate the structure, and OSB is known to expand when exposed to moisture, leading to an uneven surface. This can result in cracks or falling tiles.

Travertine Tile Characteristics

• Travertine Tile ease of installation: On a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say that installing travertine tile generally falls around a 6 or 7. Travertine is a natural stone, similar to marble and limestone, and is prone to chipping or cracking during installation.
  
• Travertine Tile weight: Travertine tiles typically weigh 6 to 8 on a scale of 10, with 10 being the heaviest. They are considered a relatively heavy building material due to the nature of travertine stone, which is denser than other materials like ceramic or glass but not as heavy as granite or marble.
  
• Travertine Tile thickness: Travertine tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods. Travertine tiles are thicker than natural stone tiles, such as limestone or slate.
  
• Travertine Tile Slip resistance: I would rate the slip resistance of travertine tiles as 6 to 7 on a scale of 10, as travertine tiles can be slippery when wet. The slip resistance of travertine tiles can also depend on the tile's finish. For example, honed or brushed tiles are generally less slippery than polished tiles.
  
• Travertine Tile Scratch resistance: On a scale of 1-10, with 1 being low resistance and 10 being high resistance, I would rate travertine tiles as having a resistance to scratch around 4 or 5. However, it’s important to note that this can vary depending on the specific type of travertine and quality.
  
• Travertine Tile Indoor to Outdoor: Travertine tiles can be utilized for indoor to outdoor applications, but it is crucial to contemplate the durability and maintenance of the travertine in an outdoor setting. Travertine is a porous stone vulnerable to staining, etching, and discoloration from acidic substances such as rainwater and fertilizer. To use travertine tiles outdoors, they should be sealed regularly to safeguard them from the elements.
  
• Travertine Tile Cost: Travertine is a type of limestone, so the cost is typically similar to limestone. It is usually less expensive than marble or granite but more costly than ceramic or porcelain tiles. The cost of travertine tiles would likely be around 5 to 7 on a scale of 1 to 10, depending on the specific product and location.
  

Travertine Tile: Natural looking

Travertine tiles can feature a natural-looking top layer, as they are cut from natural rock. Their unique, porous, and veiny appearance adds to their natural appeal.

Travertine Tile: Mosaic

Travertine tile can have a mosaic appearance. It is a natural stone frequently utilized in flooring, countertops, and wall cladding. It can be cut into small pieces, referred to as tesserae, and arranged in a mosaic pattern to create a decorative image or design. These tesserae can then be cemented to a backing surface to form a travertine mosaic.

Quarry Tile for the Toilet/Bathroom Wall

Are Quarry Tile for the Toilet/Bathroom Wall a good option?

Quarry tiles are a good option for bathroom and toilet walls. All thanks to its superb durability and ability to resist slippery, and they are also easy to clean.

Is Oriented Strand Board (OSB) a good substrate for Quarry Tile on the Toilet/Bathroom Wall?

Oriented Strand Boards (OSB) are unsuitable substrates for Quarry tiles due to their material characteristics. The smooth surface of OSB makes it unsuitable for direct tiling. Concrete walls are a better option for a strong bond with quarry tiles.

Quarry Tile Characteristics

• Quarry Tile ease of installation: Installing quarry tile on a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say that it falls around a 4 or 5. Quarry tile is an unglazed ceramic tile commonly used in commercial and industrial settings. It is relatively easy to install compared to natural stone tiles and is similar in installation to traditional ceramic tiles.
  
• Quarry Tile weight: Quarry tiles typically weigh 7 to 8 on a scale of 10, with 10 being the heaviest. They are considered a relatively heavy building material due to their composition, typically made from natural clay, pressed, and fired at high temperatures. They are denser than ceramic tiles but less heavy than granite or marble.
  
• Quarry Tile thickness: Quarry tiles typically range in thickness from about 3/8 inch to 3/4 inch. The thickness may vary depending on the manufacturer and the type of tile, but they are usually consistent and uniform.
  
• Quarry Tile Slip resistance: I would rate the slip resistance of quarry tiles as 8 to 9 on a scale of 10. Quarry tiles are known for their high slip resistance and durability and are often used in commercial and industrial environments such as kitchens, bathrooms, and high-traffic areas.
  
• Quarry Tile Scratch resistance: On a scale of 1-10, with 1 being low resistance and 10 being high resistance, I would rate quarry tiles as having a resistance to scratch around 8 or 9. Quarry tiles are relatively hard and dense, making them less likely to scratch or chip than other types of tile flooring, such as marble or limestone.
  
• Quarry Tile Indoor to Outdoor: Quarry tiles can be used for indoor and outdoor flooring, but they must be installed on a stable surface and in areas where temperature and moisture will not harm them. They are also appropriate for high-traffic areas and are straightforward to clean.
  
• Quarry Tile Cost: On a scale of 1 to 10, with 1 being the least expensive and 10 being the most costly, quarry tiles would likely fall on the lower end of the scale. Quarry tiles are made from natural clay and are generally less expensive than other types of tile, such as marble, granite, or travertine. The cost of quarry tiles would likely be around 3-4 on a scale of 1 to 10, depending on the specific product and location.
  

Quarry Tile: Natural looking

Quarry tiles are made from natural clay extracted from quarries and then formed into tiles, so they have a natural-looking top layer. They are typically unglazed and have a rough texture, which can add to their natural appearance.

Quarry Tile: Mosaic

Quarry tiles can have a mosaic appearance. Quarry tiles are unglazed ceramic tiles made from natural clay and often used for commercial and industrial flooring. They can be cut into small pieces and arranged in a mosaic pattern to create a decorative image or pattern.

Metal Tile for the Toilet/Bathroom Wall

Are Metal Tile for the Toilet/Bathroom Wall a good option?

Metal tiles are a reasonable choice for bathroom walls. They are waterproof, easy to clean, and very versatile.

Is Oriented Strand Board (OSB) a good substrate for Metal Tile on the Toilet/Bathroom Wall?

Metal tiles should not be installed on an Oriented Strand Board (OSB). OSB is susceptible to swelling or delaminating under prolonged exposure to moisture, which can destroy the adhesive used for tile installation.

Metal Tile Characteristics

• Metal Tile ease of installation: Installing metal tile on a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say it falls around a 6 or 7. Metal tile installation requires more skill and attention to detail than traditional ceramic tile. The tiles are typically made of aluminum, copper, stainless steel, or zinc, which are relatively lightweight but can be difficult to handle and require specialized cutting tools to achieve a precise fit.
  
• Metal Tile weight: Metal tiles typically weigh 3 to 5 on a scale of 10, with 10 being the heaviest. They are considered lightweight building materials due to the nature of metal, which is relatively lightweight compared to other materials like ceramic, stone, or glass. However, the weight may vary depending on the type of metal and the thickness of the tile.
  
• Metal Tile thickness: Metal tile thickness varies depending on the type of metal and the application of the tile. For example, aluminum tiles are typically thinner than steel tiles. The thickness of metal tiles can range from around 1/32 inch to 1/8 inch for aluminum tiles and from around 20 to 14 gauge (0.03 to 0.0747 inches) for steel tiles.
  
• Metal Tile Slip resistance: I would rate the slip resistance of metal tiles as 3 to 4 on a scale of 10, as metal tiles can be slippery when wet and are often smooth. The slip resistance of metal tiles can also depend on the type of metal and the tile's finish. For example, metal tiles with a brushed or matte finish may be less slippery than those with a polished finish.
  
• Metal Tile Scratch resistance: On a scale of 1-10, with 1 being low resistance and 10 being high resistance, I would rate metal tiles as having a resistance to scratch around 7 or 8. Metal tiles are known to be durable and resistant to scratches. However, metal tiles made of stainless steel or aluminum are more resistant to scratches than those made of copper.
  
• Metal Tile Indoor to Outdoor: Metal tiles can be used for indoor to outdoor applications. They are durable and resistant to weathering, making them appropriate for exterior use. However, it is crucial to ensure the metal tiles are properly sealed and maintained to avoid rust or corrosion.
  
• Metal Tile Cost: On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, metal tiles would likely fall on the higher end of the scale. Metal tiles such as aluminum, stainless steel, and copper are typically more costly than other types of tile like ceramic, porcelain, or quarry tile. The cost of metal tiles would likely be around 8 to 9 on a scale of 1 to 10, depending on the specific product, location, and type of metal used.
  

Metal Tile: Natural looking

Metal tiles do not have a natural-looking top layer, as they are made from metal materials such as steel, aluminum, copper, etc. Metal tiles are often used for their durability, wear, heat, and fire resistance.

Metal Tile: Mosaic

Metal tiles can have a mosaic appearance. They can be cut into small pieces, known as tesserae, and arranged in a mosaic pattern to form a decorative image or pattern. These small pieces can then be cemented to a backing surface to create a metal tile mosaic.

Resin Tile for the Toilet/Bathroom Wall

Are Resin Tile for the Toilet/Bathroom Wall a good option?

Resin tiles are a reasonable choice for bathroom walls if you care about the room's aesthetics.

Is Oriented Strand Board (OSB) a good substrate for Resin Tile on the Toilet/Bathroom Wall?

Resin tiles are not suitable tiles to lay on OSB. Oriented Strand Board (OSB) has low water absorption due to the use of synthetic resin as a binder for sealing the board. However, excessive water exposure can weaken the adhesive and cause damage to the wall structure.

Resin Tile Characteristics

• Resin Tile ease of installation: Installing resin tile on a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say it falls around a 5 or 6. Resin tiles are engineered tiles made from resin and other materials. They are typically lightweight and easy to handle and cut but require more attention to detail regarding surface preparation as they need a flat and smooth surface to install on.
  
• Resin Tile weight: Resin tiles typically weigh 2 to 4 on a scale of 10, with 10 being the heaviest. They are considered lightweight building materials due to the nature of resin, which is relatively lightweight compared to other materials like ceramic, stone, or glass. However, the weight may vary depending on the resin type and the tile's thickness.
  
• Resin Tile thickness: Resin tiles typically range in thickness from about 1/8 inch to 1/4 inch. They come in various thicknesses to accommodate different applications and installation methods.
  
• Resin Tile Slip resistance: I would rate the slip resistance of resin tiles as 7 to 8 on a scale of 10. Resin tiles are known to be slip-resistant and durable and have a smooth finish that can provide a good grip. The slip resistance of resin tiles can also depend on the type of resin used and the additives added to the mixture. Some resin tiles may have a higher slip resistance than others.
  
• Resin Tile Scratch resistance: On a scale of 1-10, with 1 being low resistance and 10 being high resistance, I would rate resin tiles as having a resistance to scratches around 8 or 9. Resin tiles are considered to be a durable and long-lasting flooring option.
  
• Resin Tile Indoor to Outdoor: Resin tiles can be used for indoor to outdoor applications. Resin is a durable and weather-resistant material suitable for use in exterior environments. However, ensuring that the resin tiles are UV-protected is crucial, as the sun’s rays can cause fading or deterioration over time.
  
• Resin Tile Cost: On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, resin tiles would likely fall on the higher end of the scale. Resin tiles are made from a mixture of materials, typically polyester or epoxy resin and pigments, which are poured and cured to form a solid surface. These tiles are often used for decorative purposes and have a unique and attractive appearance. They are typically more costly than other types of tile, such as ceramic, porcelain, or quarry tile. The cost of resin tiles would likely be around 7 to 8 on a scale of 1 to 10, depending on the specific product, location, and type of resin used.
  

Resin Tile: Natural looking

Resin tiles do not have a natural-looking top layer as they are made from synthetic materials such as polyester or epoxy. They are often used as decorative surfaces and can be made to mimic the appearance of natural materials such as wood, stone, or marble.

Resin Tile: Mosaic

Resin tiles can have a mosaic appearance. Resin is a flexible material that can be shaped into various designs and patterns, including a mosaic pattern.

Onyx Tile for the Toilet/Bathroom Wall

Are Onyx Tile for the Toilet/Bathroom Wall a good option?

Onyx tiles can be used on bathroom walls for a soft color combination and have more water resistance than marble tiles. However, it's crucial to remember to seal it before grouting.

Is Oriented Strand Board (OSB) a good substrate for Onyx Tile on the Toilet/Bathroom Wall?

Onyx should not be installed on an Oriented Strand Board (OSB) due to the composite structure of the board, which may be vulnerable to delamination in its cross-section.

Onyx Tile Characteristics

• Onyx Tile ease of installation: On a scale of 1-10, with 1 being the easiest and 10 being the most difficult, I would say that installing an onyx tile falls around an 8 or 9. Onyx is a delicate natural stone prone to cracking and chipping during installation, and it requires specialized cutting tools and a skilled hand to ensure a successful installation.
  
• Onyx Tile weight: Onyx tiles typically weigh 7 to 9 on a scale of 10, with 10 being the heaviest. They are considered a relatively heavy building material due to the nature of Onyx stone, which is denser than other materials like ceramic or glass but not as heavy as granite or marble. The weight may vary depending on the type of Onyx and the tile thickness.
  
• Onyx Tile thickness: Onyx tiles typically range in thickness from about 3/8 inch to 3/4 inch. They come in various thicknesses to accommodate different applications and installation methods.
  
• Onyx Tile Slip resistance: It is difficult to rate the slip resistance of onyx tiles on a scale of 10 as it can vary depending on the specific type of onyx, the surface finish, and the surface condition. Generally, onyx tiles have a smooth surface that can be slippery when wet, but the slip resistance can be increased by honing or brushing the tile's surface to create a more textured finish.
  
• Onyx Tile Scratch resistance: On a scale of 1-10, with 1 being low resistance and 10 being high resistance, I would rate onyx tiles as having a resistance to scratch around 4 or 5. It's important to note that this can vary depending on the specific type and quality of onyx. Onyx tiles are considered a luxury and high-end option, but due to their fragility, they are primarily used for decorative purposes and not for high-traffic areas.
  
• Onyx Tile Indoor to Outdoor: Onyx tiles can be used for indoor and outdoor applications, but they may not be optimal for exterior use. Onyx is a natural stone that is relatively porous and can be sensitive to changes in temperature and humidity, which can result in cracking, chipping, or discoloration over time.
  
• Onyx Tile Cost: On a scale of 1 to 10, with 1 being the least expensive and 10 being the most expensive, onyx tiles would likely fall on the higher end of the scale. Onyx is a type of natural stone that is formed from layers of minerals and is often used for decorative purposes, such as in tile or stone veneers. Onyx tiles are considered luxury decorative tiles and are more costly than other types of tile, such as ceramic, porcelain, quarry, or granite tiles. The cost of onyx tiles would likely be around 9 to 10 on a scale of 1 to 10, depending on the specific product, location, and type of onyx used.
  

Onyx Tile: Natural looking

Onyx tiles can have a natural-looking top layer cut from natural onyx stone. Onyx is a translucent, layered, and often brightly colored mineral, which can add to its natural appearance.

Onyx Tile: Mosaic

Onyx tiles can have a mosaic appearance. Onyx is a natural stone that can be cut and shaped into small pieces, which can then be arranged in a mosaic pattern to create a decorative tile. Additionally, mosaic onyx can be produced by gluing or epoxying smaller pieces of onyx together to form a larger tile with a mosaic design.